Tuesday, January 12, 2010

Wooden Model Boats Building A Wooden Boat ?

Building a wooden boat ? - wooden model boats

How can I learn how to build a boat? A traditional wooden boat. I do not know the model name, but a ship with a small cottage, perhaps. And what the cost of doing something like that?
Thanks

14 comments:

mark t said...

Check this site for information on the following:

http://www.westsystem.com/ss/how-to-publ ...

these kits and craft:

http://www.bruceroberts.com/

http://www.clarkcraft.com/

http://classicwoodenboatplans.com/

http://www.smallboats.com/kits.htm

much in packs of wooden boats in the search

Vasco Pyjama said...

There are many designs on the Internet. Some manufacturers also a blog, and you can see every step. I seconds the proposal, in the library to find books on this subject.

For a small boat that offers plenty of space, a sound hard to beat. They have a traditional look, that you might like. The original site was below 3 models with a space in the cabin, and less than 20 meters long posted. Look around for other models, you can find something you like better.

The cost of building a wooden boat is about one third to one-half the cost of buying a boat the same size. The downside is that we buy very little value back into a home built boat.

trunorth said...

Let me say that I am the owner of several wooden boats at the start, but they were built by Chris Smith and Sons Boat Company.

Building a wooden boat is a huge undertaking, especially in something as big as a yacht or a day of sailing.

Hanging around a wooden boat workshop / garden offers you a good idea for all the work that goes into the Woodies.

Take a course at Mystic Seaport and learn from the base. Drawing of a boat can be a real brain tester.

Start with a boat or canoe and see how it goes.

And then Jimmy Buffett and Alan Jackson "Shipbuilding" see
.... Curve only by a local plan.

Drummer Dan said...

The price depends on the size (12-foot boat? Or a 30 foot yacht? Used) Fiberglass and materials (wood or?) .... Most boats are made of teak. And Teak is very expensive ... Comes mainly from Indonesia, I think .... Following is the engine, the various types of equipment, etc. .. And the time it takes to build, even if you do all the right tools, fasteners, glue, etc. .. Phew ... Preparation of a long process ... let alone a ship's hull from wood is difficult to build, and almost as, if not more difficult to maintain obtain ... In other words, after a certain time some more (than others), the leak as a madman (a sieve to mind) comes ... I prefer fiberglass shell .... But everything there is to say, when you're done, you'll never build a live experience as rewarding and satisfying as a boat by hand!

threeshe... said...

You can begin to learn, first reading through all that is at hand. This will help you understand and decide what to build and use the first method.

I suggest learning wooden boats googling ',' kits, wooden boat plans "and" how to build a wooden boat.

A good place to spend a little more about this site:

http://www.thewoodenboatschool.com/

You can also subscribe to this great magazine:

http://www.woodenboat.com/

There are many schools of the construction of the boat, where you can learn and go, the hands can be on the shipbuilding industry. You have to take vacation time or from some, depending on where you are relative to your home. If you Google!

You need the size and type of boat you know after that date constructed using. Power? Sailing? Length? The cost for the construction of a ship on the size. If you are required to build twice the length of a boat, about four times the amount of materials and time (which they have compiled the largest ship itself).

Wooden vessels are impressive, but more maintenance than most other boats. I agree that you try a little boat, rowboat or canoe first (should be built nearly 16 feet to rule), but only after consideration and which method you build a boat with more. You will be a "boat building large enough to build the boat and store have all the tools and equipment.

You can learn that the building does not go the right way to where they want to be. It is a boat on what you want, or a building is the goal?

What costs you a small vessel for almost nothing, a Nice boat for less than $ 3000, and if you want to build a few million can be spent building a huge yacht. I doubt you have time for that as well as shipbuilding.

Good luck! I hope you learn to build a wooden boat and have a long happy life in the water.

ricsuduk... said...

Like all things start small and build their skills continuously. Do not pay attention to the negativity of some of the respondents, some must have made very bad experiences, or the eyes were bigger than they can chew. A well-built boat with a cover as long as all the fields - the longest history in some cases.

I love these designers present their creations are well-drawn boat, and said, much better than most. Oh, and they work really nice.

http://www.woodworkforums.ubeaut.com.au/ ...

http://www.storerboatplans.com/

The PDRacer very cheap boat is an excellent entry level - and very capable. Best way to catch some before too deep. A boat with a cabin that can take hundreds of hours to complete, and if you can work for months or years to not a little at a time.

We have a boat club, which began four weeks ago, but began in 1970! Life can be on the road.

Good luck

Lawrence S said...

Getting a job as a helper in a shipyard. View all Wooden Boats Bring The Pain, you know why they are called holes to spend the money.
Working in a garden will give you an idea of costs, skills and tools. You can reach agreement on a draft to someone elses little or nothing of the sort.
A man can not be lovers, and a wooden boat.

Simon A Mechanic said...

You first need a great portfolio.

So much time and from place to place.

As Carvel Construction, Double diagonel, cold formed and the list goes on ..

Buy a soldering iron and make steel

Simon A Mechanic said...

You first need a great portfolio.

So much time and from place to place.

As Carvel Construction, Double diagonel, cold formed and the list goes on ..

Buy a soldering iron and make steel

wayneypa... said...

I explained to a library book, how to build and what tools you need.

aclrfp said...

If you have something to test their skills and get in the water build really cheap to try to build a racecar PD.

The plans are free.

http://www.pdracer.com/

jtexas said...

this right, this page is a place to - they sell plans and kits, and web site links to the methods and techniques, materials, etc.

http://www.glen-l.com

KJ said...

wayneypayney55555 hey, what is the name of this great book

KJ said...

wayneypayney55555 hey, what is the name of this great book

Post a Comment